Introduction: MOTOR CAT SPINNING STIMULATING PLAY TOY
This is a simple and effective toy to make any cat busy playing.
Step 1: Tools and Supplies
Drill machine and Screw Driver
1x1 wood board
12 inches and 1.5 inches thick wood piece
Asmo motor with 12v adaptor
Step 2: Making a Pillar
Take out the center dimension and drill three holes in it and tighten the wood piece from other side by screws.
Step 3: Spinning Part
carefully drill a hole in the plastic shaft of motor and tighten it on over the wood piece by screws
Insert the metal wire in the holes of motor shaft, connect it with 12v supply
Step 4: Making Mouse
Take any cardboard and draw a mouse over it and cut it out ,make a hole in the center and put it in one side of metal wire
Step 5: Playing Toy Is Ready
Put the 12v in board and secure it with masking tape ,now your cat will be bust playing.
If you don't understand something please watch the video and vote for my instructables
This is an entry in the
We have a be nice policy.
Please be positive and constructive.