I love the idea. Awesome work.Could even go a step further add magnets to hold the lower compartment in place if someone did pick it up. Again great work thanks for sharing!
DIY Sliding Door Bookshelf
Build a Simple Box for My EDC With No CNC
That is a great idea and could work flawless. if I remove my center shelf i have plenty of room to stand and get to the rear of the units. but your idea would be best if the room for the shelf wasn't there.
My good friend David helped me with this step. In the settings you have to orientate the screen where to look for player one. after that in the settings menu of each game you have to change the screen style to cocktail vs upright.only about 100 games will work in this set up. im sure more but at the moment that is also enough to pass the time.
Table Top Cocktail MulticadeView Instructable »
Thank you Jusstanothernood,I only notice the vibration on larger loads of jeans or other heavier wet items. normal cloths and everyday washes I have no issue. the back wall its attached to is the back side of my kitchen so its also not been an issue as if it may have been a bedroom or something i was sitting in trying to relax ect. I would have no issue building this again.
Thank you Wrsexton!
Thank you for your input. and gives people more to think about when planning my set up as stated below.*The units have a good amount of room behind them. and about 6+ inch in front to move forward. if needed yes could find a stool or box to support the front if needed more room. *The top is supported by the cleat and center shelf it does not touch the units.and not screwed or bolted down just held in place by weight.
I do agree they are heavy. The top shelf is just laid on its cleat just holding on by its own weight.the center shelf is not bolted in place and now just sandwiched between the top and bottom and does not budge. there is a decent amount of room behind plus around 6 inches plus in front to slide out. I was able to easily get behind them and switch out the units once both were on the platform from the old to new systems. But that did give me another cool idea you could build a small platform on some sort of heavy duty drawer sliders and easy slide out problem solved.
Repurposed Pool Table Light...View Instructable »
Thank you, hope it inspires you or others to give it a try.
I personally would not buy the bases. They cost a ton in comparison of what you can build. They also lack useful space.As with any system when its loaded with jeans or any heavy material the dryer does shake. I've never had it move or even budge but it will shake the kitchen wall a little. Nothing noticeable or I have ever had a concern about. I would do it all over again. The added space and hiding the dirty clothes makes it all worth it.
Washer Dryer Built InView Instructable »
Panel Style LED Fiber Optic...View Instructable »
Beer Flight Tray
Finished Mine up the other night. I got overly happy with the router table and routed the bottom edge and it messed up my feet so had to roll all the corners. Turned out decent. Thank you for the plans and idea!
Pallet Wood Serving Tray
How to Make a Simple Crosscut Jig
Crown Royal Serving TrayView Instructable »