How to Tell Time...





Introduction: How to Tell Time...

About: i love to try and build new things

This was a really simple project that turned out great.

Step 1: Tools and Material

  • jig saw
  • chop saw
  • table saw
  • drill
  • 1 inch bit
  • 2 screws
  • 6 pallet boards
  • square
  • glue
  • brad nailer
  • stain
  • polyurethane
  • cricut/ stencil
  • tape measure
  • pencil

Step 2: Wine Glass Holder

For this step I used a 16 inches piece of pallet wood made a mark at 2" 6" 10" and 14" and 16". I then drilled a 1 in hole at the 2,6,10,and 14 cutting the 16 mark flush. using a square i marked the lines of the holes. cut using table saw.

Step 3: Construct the Base

I place 2 pieces of wood 16" on center apart and glued and nailed the 30 inch pieces of wood cutting of the excess using a jig saw.

Step 4: Place the Wine Glass Holder on

I used a wine glass as a reference to gage the space needed so the glass would not hang off the bottom. Using screws and glue i secured it to the base.

Step 5: Stain and Poly

Pick you stain or paint color and make it happen allow time to dry

Step 6: Print Out Stencil or Vinyl

I choose a storybook font and place them top center.

Step 7: Mounting Hardware

I put the wood 16 inches on center to allow it to be attach to wood studs. I also used wire with eye bolts to allow it to be hung.

Step 8: Place the Hooks

I used small 1 inch hooks to hold the coffee mugs i used 1 for reference to get the spacing required to hang 4 mugs.

Step 9: Sell It !!!

I have made 6 of these and sold them fast!! have fun

Creative Misuse Contest

This is an entry in the
Creative Misuse Contest



    • Water Contest

      Water Contest
    • Oil Contest

      Oil Contest
    • Creative Misuse Contest

      Creative Misuse Contest

    2 Discussions