Transforming a Router Into Toy Robot

848

2

0

Published

Introduction: Transforming a Router Into Toy Robot

About: Maker | Open source ❤ | Engineer

In This instructables I will explain you how i have transformed a router into the following shape.My router was not working , and I thought to reuse to make some craft.Adding two eyes to the router looks like a toy robot and it is having a antenna on it already too.

Step 1: Materials Used:

  • A Old Router
  • One Plastic ball
  • 2 LEDs
  • Battery
  • switch(I used a slide switch)
  • Fabric Paint

Tools used:

  • Hobby knife
  • Soldering iron
  • Glue gun
  • Screw Driver

Step 2: Dismantle the Router

Step 3: Cut Plastic Ball by Half

Step 4: Mark Position of Eyes Using Pencil

Step 5: Make Holes to Insert LEDs

Step 6: LED Circuit

connect two Led in series with circuit.Insert switch to switch on/off.

Step 7: Fixing+Testing

Step 8: Painting

Step 9: That's It

Share

    Recommendations

    • Oil Contest

      Oil Contest
    • Backpack Challenge

      Backpack Challenge
    • Stick It! Contest

      Stick It! Contest

    Discussions