Tell us about yourself!
Ever Blooming Mechanical Tulip
75mm x 100mm. The gap in the frame is 3.2mm, so max thickness I recommend is 3mm.
You can view and comment on the design using this link: https://a360.co/2SiUWKm
Target following: yes. One could do it optically with a camera, but couldn't do that with microcontroller like Nano. Would have to go to Raspberry Pi Zero or other microprocessor. It's been done in a Portal turret already!! https://www.instructables.com/id/Building-a-moving-and-tracking-Portal-Turret/I would love to try having multiple turrets in a room that act in a hive-like manner, that communicate with one another and follow a target. Would be cool and creepy!
Little Timmy Robot
The eye is too small and I was working on a quick update to the lens to make it bigger. I will look into the F360 file sharing. Haven't ever done that before.
As for the components, the Lidar sensor the most expensive component at ~$8 (CDN). Arduino and sound chip as low as $3 ea. Servos <$2 ea. LEDs and resistors <$1. Hard components $20 (~$15 US). ~24hrs of printing all parts if you're all set up for it, so maybe $10-$20 there? + some wiring and soldering and hardware. Less than $50 total for sure.
I thought about that, but decided against it. I knew it would garner some attention from friends and family and I didn't like the idea of a child staring into the laser... A bright LED gives the effect, and a super-bright LED would be effective too. Besides, if laser used, next step is bullets....
Ok, post is now complete with Arduino file and STL files. Good luck and happy fabbing!
Thanks! I will be posting the parts and code in the next day or so. Need to clear up some time and tidy them up a bit.
Power Loader Cosplay
Portal 2 Turret GunView Instructable »
Progressive Detail Moon Lamp
Homemade Tin Can Turbine With 3d-printed Compressor
Single Edge Safety Razor Blade Grips
Old Paint Can Secret Stash
The link as shown works for me.
75mm X 100mm, 3mm thick max.
I will be making some more but am waiting for a few parts. I will let you know once I've received the parts and updated design.
Rotating Lithophane BoxView Instructable »
Sure, lots of ways, for the box. Could make this out of cardboard, wood, lexan sheets. 4 uprights with slots to capture the prints. The problem is making the lithophane panels without 3D printing. That is more art and craftsmanship.
Lithophane Box With RemoteView Instructable »
Anglais, Français... ça m'est égale. Je vais revoir mon situation ce week-end.
Hmm, I'm not really in the business of making these for "profit". I thought I was giving it away!!I'll have to figure out how much time it would take plus the parts to make another one, you know, in case I get asked again.
Coke Machine Can Level Dete...View Instructable »
GoPro Stabilizer Project - ...View Instructable »