author4
45CommentsHeart of the American Gulag ArchipelagoJoined September 19th, 2010
I enjoy helping people because I can, not because a politician stuck a gun to my head or some religious type tried to manipulate me through guilt.
  • Galt commented on tonyhill's instructable You Too Can Make an Anvil6 weeks ago
    You Too Can Make an Anvil

    Awesome project, and an excellent Instructable. This one's a definite keeper! Thank you, thank you, thank you.

    View Instructable »
  • Galt followed tonyhill6 weeks ago
      • You Too Can Make an Anvil
  • Galt commented on Ignadiseñando's instructable Simple and Small Magnetic Stirrer6 weeks ago
    Simple and Small Magnetic Stirrer

    For those not inclined to read, here's a documentary that was made on the subject. The story of how the victims in Huntington, West Virginia chose to dedicate their settlement monies to helping expose the even broader impact of this travesty is a story worthy of national hero status IMO. Just ordinary folk, intentionally victimized by DuPont purely to squeeze just one more day's profits from their poisoning, and these people did something extraordinary. But yeah, stay away from anything having to do with those compounds, or their latest convoluted replacements. They are unfortunately ubiquitous in our modern world, but we all need to start walking that back regardless. https://www.youtube.com/watch?v=84glf6F3b-Y&fbclid=IwAR2sA6AJXbspZUpr4o8DxRmUosDlcgghaQhM1S-fVN9Ecw1gAiwWadIHkak

    View Instructable »
  • Galt commented on Ignadiseñando's instructable Simple and Small Magnetic Stirrer6 weeks ago
    Simple and Small Magnetic Stirrer

    Great first Instructable, just a few words on Teflon and PTFE's. The short of it is that PTFE's will likely be shown to be one of the greatest polluting compounds on the planet, even worse than the pesticides that now span the globe and infiltrate all of our food. Read it and weep: https://theintercept.com/2015/08/11/dupont-chemistry-deception/?fbclid=IwAR3nuWLnf4P7CueUjIOUfKHQ406DSQr2AZK9yDc4m8SGu7Jg7rpXLKIgjMg They've also come out with a replacement compound called Gen X that's looking like it will prove just as dangerous and destructive, but ya know, there are profits projections to hit, so it's all good, unless you're in the Netherlands or around Cape Fear, where they're making this new garbage. Meanwhile DuPont gets absorbed and redistributed in order to isolate all of its env...

    see more »

    Great first Instructable, just a few words on Teflon and PTFE's. The short of it is that PTFE's will likely be shown to be one of the greatest polluting compounds on the planet, even worse than the pesticides that now span the globe and infiltrate all of our food. Read it and weep: https://theintercept.com/2015/08/11/dupont-chemistry-deception/?fbclid=IwAR3nuWLnf4P7CueUjIOUfKHQ406DSQr2AZK9yDc4m8SGu7Jg7rpXLKIgjMg They've also come out with a replacement compound called Gen X that's looking like it will prove just as dangerous and destructive, but ya know, there are profits projections to hit, so it's all good, unless you're in the Netherlands or around Cape Fear, where they're making this new garbage. Meanwhile DuPont gets absorbed and redistributed in order to isolate all of its environmental lawsuit potential into one shell that carries few assets, assuring that the resultant lawsuits end at a dry well. Just watch the Monsanto/Bayer maeuvers for a parallel preview of the next step. Not meaning to go political, but this junk is not the benign material that we've been cooking on and told it was for half a century.

    View Instructable »
  • Galt followed DIY KING 002 months ago
      • DIY Brushless Dremel Tool
      • DIY Brushless Gimbal
      • DIY Rustic Cutlery Holder
  • Galt followed marlin_maker3 months ago
      • Biochemists Way of Baking Bread - Snuggle Up to Yeast
  • Galt followed JackmanWorks3 months ago
      • Building a Life-Size Nutcracker (that Can Crack Coconuts!)
      • Power Carved Giant "Boot Print" Wood Wall Art Panel
      • Pallet Wood Penny Boards
  • Galt commented on SusanYoung1982's instructable Teardrop Camper Made of Wood3 months ago
    Teardrop Camper Made of Wood

    Don't get me started on the awesome utility of a band saw, especially in a one saw shop, but I was directing the re-saw comment toward people that might already own one. ;) She could of course do the same thing with with a thin kerf table saw blade for the saw that she already has, but obviously even the thinnest table saw solution would still turn more wood into sawdust than the band saw.Long time fan of HW myself. Found a crepe drum cleaner there for my 37x2 SuperMax that has been a real blessing in extending abrasive life. Beats the heck out of what I used to do (one of those scenes more commonly found under the heading "Don't try this at home"). Also nice that they stock a lot of the more unusual Festool fiddly bits.

    View Instructable »
  • Galt commented on SusanYoung1982's instructable Teardrop Camper Made of Wood3 months ago
    Teardrop Camper Made of Wood

    So first of all, let me congratulate you on a wonderful job, and you get a thundering "Atta Girl!" for jumping into such a complicated project even though it was somewhat outside of your comfort zone. Also wanted to say that I love your design. Sometimes no better way of learning than just doin' it. :) Couple of ideas and suggestions for your next one, or for anyone interested in trying their hand. If you poke around in any coastal town, or on-line, you can find marine grade plywood with face veneers of bamboo, fir, birch, okoume, sapele, mahoganey, meranti, teak, and others. It's expensive, but generally very lightweight, strong, and more importantly, is put together using the right kind of glue to make it last in an outdoor environment. Lauan, usually not so much, mainly bec...

    see more »

    So first of all, let me congratulate you on a wonderful job, and you get a thundering "Atta Girl!" for jumping into such a complicated project even though it was somewhat outside of your comfort zone. Also wanted to say that I love your design. Sometimes no better way of learning than just doin' it. :) Couple of ideas and suggestions for your next one, or for anyone interested in trying their hand. If you poke around in any coastal town, or on-line, you can find marine grade plywood with face veneers of bamboo, fir, birch, okoume, sapele, mahoganey, meranti, teak, and others. It's expensive, but generally very lightweight, strong, and more importantly, is put together using the right kind of glue to make it last in an outdoor environment. Lauan, usually not so much, mainly because what you see at the home centers does not use a waterproof glue. You can test the tenacity plywood glue by dropping a small piece in boiling water if you want to find out how yours might hold up if and when water does find a way into it. Home center lauan will disintegrate, whereas the marine grade stuff will not. Someone previously recommended being OCD about sealing the edges and every side and screw hole, and I couldn't agree more, regardless of the type of wood that you choose. Not only does it protect the wood from the weather, but it also prevents it from absorbing and releasing moisture unevenly. An unfinished interior face or edge will still be able to absorb water vapor, say from the sweaty humans sleeping within, or just from the ambient conditions themselves, and if those conditions are extreme enough, like say up in the rain forests of the great northwest, the accumulating moisture can cause problems with the finish on the opposite side of the wood.While the marine grades of plywood will have clear grained veneers to give you a beautiful finish, they are also sometimes available in oversized dimensions, such as 5' widths and 10 or 12' lengths, helping to minimize or eliminate your number of seams. Another build method that you can employ is that of wood stripping, and then covering with fiberglass. It may seem intimidating, but there are lots of good books and tutorials out there that can guide you through, and the finished product will not only be incredibly strong, but weather-proof as well. Basically a ribbed form is constructed and wood strips are laid across the form and either pinned or temporarily hot glued to the form while having their long edges formed and glued to the previously laid strip. The edge shaping can be a simple bevel or squared edge formed with a hand plane, or a kind of fitted cove and bead shape can be made using something like the trim router. This is a beautiful method that is more common to canoes and kayak construction, but I've always thought it would make for an interesting camper build. If you have a band saw and an appropriate local wood species available for re-sawing, you could make your own strips, mix species and colors, and end up with something even more unique, as well as being less expensive (other than the fiber-glassing supplies of course). Ready made strips are usually about 1/4"-5/16" thick and 5/8"-1" wide, and in red or yellow cedar vary from $.45 to $.60 a linear foot. That can amount to about $300 for the same equivalent area of coverage afforded by a 4'x8' sheet of plywood. Re-sawing an 8' length of 1"x12" that you pay $8 per board foot for (a bd. ft. is 1"x12"x12") will yield about 128 strips of lightly dressed 3/4" wide x 5/16" thick 8' strips out of that $64 eight foot board, and laid up side by side that will provide the rough equivalent of (2) sheets of 4'x8' plywood for the cost of the board plus maybe $30 for the re-saw blade. Of course it makes for a seriously boring turn on the band saw, but you're essentially trade your time for the savings in money. Here's a beautiful strip canoe that was built by another Instructable contributor if you're not familiar with the process.https://www.instructables.com/id/Building-A-Cedar-...Link to a nice thin kerf re-saw blade:https://www.highlandwoodworking.com/wood-slicer-re...Here's what sapele plywood looks like btw:And lastly, if ya really wanna treat yourself to some nice hand held power tools, check out Festool sometime. Every wood worker deserves at least one. ;)

    View Instructable »
  • ☠WEEDINATOR☠  Part 3: Chassis Build

    Your usual, awesome ible

    View Instructable »
  • Galt commented on Gooddadbadman's instructable Tsunami Hangover Breakfast Melt1 year ago
  • The NanoStillery™ - Automated Whiskey Distillery

    Always love your projects. Here's a few pics of some other builds that I take inspiration from. S/S reducing fittings also work well with the draw bolt dimpling concept to give a nice well for soldering. Also the sanitary cloverleaf fitting attachment allows either a column or a pot still config using the same boiler components.

    View Instructable »
  • Galt commented on phrazelle's instructable Steampunk Raspberry Pi Laptop2 years ago
    Steampunk Raspberry Pi Laptop

    Very cool. Great inspiration. Thanks for the sources as well.

    View Instructable »
  • Galt commented on makjosher's instructable Rocket Boat2 years ago
    Rocket Boat

    Like I said - just mental floss to add to your already creative view. Quite the engineering challenge all told, especially since I can't imagine the thrust delivery from the Estes engines is all that steady. Used to launch and lose them all the time as a kid. Nothing full scale really equates due to the obscene ratio of thrust to size and weight that you're dealing with, other than maybe an air-to-air missile. Reminds me of the urban legend/Darwin Award about the guy who strapped a surplus jet engine to the roof of his station wagon out in the desert. Supposedly nothing found of him except the rubber from him standing on the brakes just before the car left the road and went airborne, ultimately becoming a black greasy spot on the side of some butte. :)

    View Instructable »
  • Galt commented on makjosher's instructable Rocket Boat2 years ago
    Rocket Boat

    Awesome job on your "ible". I build kayaks, so probably none of what I know is of any value to you, but here's some random thoughts for mental floss anyway. Looking at the Navy hydrofoil it occurred to me that as already said the forward position of thrust would aid stability, but how about adjusting weights? Maybe the added weight would help maintain directional stability by limiting the effect that every little ripple or puff of wind might have. Also the added weight might make it simpler to try and balance using actual foils to raise the entire craft out of the water while still keeping the underwater wings submerged? Also kept thinking about the manta ray looking device that they sell to affix to the lower unit of outboards to help acceleration attitude from a rear propuls...

    see more »

    Awesome job on your "ible". I build kayaks, so probably none of what I know is of any value to you, but here's some random thoughts for mental floss anyway. Looking at the Navy hydrofoil it occurred to me that as already said the forward position of thrust would aid stability, but how about adjusting weights? Maybe the added weight would help maintain directional stability by limiting the effect that every little ripple or puff of wind might have. Also the added weight might make it simpler to try and balance using actual foils to raise the entire craft out of the water while still keeping the underwater wings submerged? Also kept thinking about the manta ray looking device that they sell to affix to the lower unit of outboards to help acceleration attitude from a rear propulsion approach. That wing looks a lot like the foils of the hydrofoil. Just noodlin'. We have a nearby mill pond where people race RC nitro-methane boats. Might have to build one of these just to blow their minds one day. :)https://en.wikipedia.org/wiki/Hydrofoil

    View Instructable »
  • Galt commented on Tecwyn Twmffat's instructable Food for the Apocalypse2 years ago
    Food for the Apocalypse

    Keep a couple of Kunekune pigs (friendliest, easiest keeping, greatest grazing and tasting pig out there) and let them self harvest the beets. Maybe plant some lopes, watermelon and pumpkins with them That way your somewhat limited food source is converted into tasty, tasty bacon, and your pigs feed themselves for a good portion of the year. You can lock the pigs in the cellar at the night for safe keeping - they're generally cleaner than most people, but a barn or hut works too. Kunekunes also stay small and marble like Kobe beef, so you won't find a more succulent pigOther than rats and roaches, spirulina algae is also a tremendous super food for the post apocalypse. All of the essential amino acids and protein you could want. Just be sure to start with a pure strain (Univ. of Texas ...

    see more »

    Keep a couple of Kunekune pigs (friendliest, easiest keeping, greatest grazing and tasting pig out there) and let them self harvest the beets. Maybe plant some lopes, watermelon and pumpkins with them That way your somewhat limited food source is converted into tasty, tasty bacon, and your pigs feed themselves for a good portion of the year. You can lock the pigs in the cellar at the night for safe keeping - they're generally cleaner than most people, but a barn or hut works too. Kunekunes also stay small and marble like Kobe beef, so you won't find a more succulent pigOther than rats and roaches, spirulina algae is also a tremendous super food for the post apocalypse. All of the essential amino acids and protein you could want. Just be sure to start with a pure strain (Univ. of Texas or Texas Tech I believe has a repository) and it can actually be fed by growing it in waste water used to scrub combustion gases. It is the only algae that will survive at the high pH that it requires (over 8 something I believe) so as long as the pH doesn't drop you are assured of having a pure sample. Important because some of the blue/green algae that grows at the lower pH is toxic. Spirulina can be eaten fresh and slimy, or dried and mixed with other bulkier foods for a more complete nutritional profile.Lastly, rabbits are tough to beat for space efficient animal protein that can be safeguarded from zombies while still replacing itself at a high rate even in captivity - plus they're pretty portable if ya have to run. If you're going to stay and fight, try growing a composite "fedge-row" of copiced bush willow on the inner perimeter, woven into a kind of espalier lattice of edible forage for pigs and bunnies. Then add an outer perimeter of copiced and laid down Orange Osage hedge beyond that. The willow is 14-15% protein and great roughage for the bunnies, and for the pigs (just gotta watch the calcium) and the limbs are great for all kinds of survival/homesteading projects - plus it's natural aspirin. Orange Osage hedge is said to grow "horse-high, bull-strong and pig-tight". Its thorns will likely further shred any interloping zombies and its fruit, the "hedge apple", actually looks like a brain - so it may also work as a distraction to the invading hoard. Orange Osage also makes a fantastic firewood, great rot proof fence posts, tool handles and war clubs, and bows made from its limbs are said to be as good or better than those of the English Yew. So aside from providing zombie protection and distraction, animal fodder and medicine, your "Fedge" could also supply you with great fuel for the fire to roast your pig or spit your rabbit while you sit back and pick off distracted zombies with your osage bow and willow arrows. Add a few mulberry to the hedge (also good firewood and fodder) 'cuz bees love the blossoms of all three, so you'll have some tasty mulberry mead to wash it all down with. Maybe save the beet hooch to fuel the Mad Max-mobile with the algae eating exhaust scrubber (to make you harder to track). Call it sustainable zombie survival symbiosis. Just 'cuz we're fighting zombies in the post apocalypse to stay alive doesn't mean we can't enjoy a good nosh and a flagon 'round the fire. ;)

    View Instructable »
  • Galt commented on Tecwyn Twmffat's instructable 'In the Leaf' Solar Cooked Sweetcorn2 years ago
    'In the Leaf' Solar Cooked Sweetcorn

    Same idea, but over charcoal you get a little char on the leaves and some caramelizing of the corn sugar. Awesome!And then, 'cuz ya can't have too much delicious, get some butter from grass fed cows, preferably a nice Guernsey or Jersey. The grass feeding allows the cow to uptake a lot of carotene, which ends up in the milk making it a dull yellow color. The higher milk fat and carotene content makes a higher fat content butter that is such a bright yellow it looks fake, but the mouth feel and taste is beyond belief. Also nice with a little corriander and/or some fine powdered chili pepper roasted in. Slip the leaf back, sprinkle and straighten them back out, then cook.

    View Instructable »
  • Galt commented on MrJonesEducation's instructable Frankenstein Light Switch2 years ago
    Frankenstein Light Switch

    Simply awesome. The only way to make it any better would be if you could have sparks fly each time it was repositioned. :)

    View Instructable »
  • Galt commented on seamster's instructable Restore a rusty toolbox2 years ago
    Restore a rusty toolbox

    Little disappointed that you didn't lay down a couple dozen coats of hand rubbed lacquer and clear. Seriously though, waaaay too pretty for bangin' with tools. My only question is where the hell are the cast alloy Shelby mags? :) Beautiful job! You should be doing commercials for Rust-oleum. Wait... I think you just did - might wanna send 'em a link. ;) Reuse, re-purpose, recycle and wear out. Way to go!

    View Instructable »
  • Galt commented on MiiBooth's instructable Make your own charcoal at home (Video)2 years ago
    Make your own charcoal at home (Video)

    Charcoal as a soil amendment also has particularly interesting characteristics. It functions as a giant sponge for soil microbes to inhabit, as well as holding moisture and nutrients that would otherwise drain away or evaporate. Care must be taken to first "inoculate" the charcoal with some sort of nutrient to keep it from sucking up what's already present in the soil that it's added to. It's popularity as a soil amendment also brings with it a new name: "Biochar", but it's still just charcoal, or carbon. The inoculation process that we use when the charcoal is destined for use in the soil is to allow our animals to urinate on it, since urine=urea=nitrogen. Not quite that simple but close.Using charcoal in this fashion also works as a deodorizer. The smells that we ...

    see more »

    Charcoal as a soil amendment also has particularly interesting characteristics. It functions as a giant sponge for soil microbes to inhabit, as well as holding moisture and nutrients that would otherwise drain away or evaporate. Care must be taken to first "inoculate" the charcoal with some sort of nutrient to keep it from sucking up what's already present in the soil that it's added to. It's popularity as a soil amendment also brings with it a new name: "Biochar", but it's still just charcoal, or carbon. The inoculation process that we use when the charcoal is destined for use in the soil is to allow our animals to urinate on it, since urine=urea=nitrogen. Not quite that simple but close.Using charcoal in this fashion also works as a deodorizer. The smells that we associate with livestock is a variety of volatile compounds being evaporated into the atmosphere, as anyone familiar with the old cow fart/methane stories is aware. By adding charcoal to animal feed and/or spreading in areas where animals eliminate wastes these evaporating compounds can be captured and harvested for later use while improving the olfactory experience for people in the surrounding area. More importantly all of these evaporating molecules don't just disappear. Sooner or later they latch onto larger molecules and come back to earth in solution when it rains, much the same way that unfiltered coal burning brought us acid rain.https://en.wikipedia.org/wiki/Terra_pretaCharcoal is also used as a filter, particularly for capturing gases and purifying water. We use an ozone generator to burn off organic impurities in an aquaculture project and since excess ozone that is not consumed in the process is bad stuff any excess is passed through a carbon bed where it is absorbed. For Preppers & Survivalists making charcoal allows them to make sand filtered drinking water more palatable, but you'll also see that carbon is an integral part of nearly all commercial water filtration schemes.The process by which this all occurs is known as pyrolis, which is basically the fractional distillation of an organic substance in a low or no oxygen environment. At various temperatures during this process where wood is use different substances will off-gas, methane or wood gas being one. By capturing that gas and recirculating it to add to the combustion process you can accelerate everything. This is what a lot of the high efficiency wood stoves do with their burning of flue gases. Fractional distillation, or cracking (not to be confused with "fracking") is how the various hyrdo-carbon compounds are extracted and separated in the oil and gas industry.There is great debate over the carbon neutrality of this process since there are a variety of by-products formed when various types of wood are "cracked", methanol for example is just one, along with the methane already mentioned. In many developing nations charcoal is made by partially burning whole swaths of forest and then covering the fire with dirt to smother the flames and create the low oxygen environment. This is not a particularly exact or controlled process and as such results in a tremendous amount of heavy smoke and local air pollution. Indonesia not too long ago experienced very serious problems as a result of this, but such is the impact of globalization. We desire a cleaner environment so we ship our polluting industry overseas; out of sight, out of mind. Most of the commercial Third World charcoal is being made from coconut husks, but it is also made from coal. Seems like a simple item but there's lots of interesting aspects to it.Lastly there are plenty of larger DIY scalings of this concept using everything from crimp on lid 5 gallon metal buckets to 30 and 55 gallon steel drums. A quick YouTube search will find everything from big double retort bio-gas reactors to backyard Biochar batch plants using 55 gallon drums. https://www.youtube.com/watch?v=dqkWYM7rYpU

    View Instructable »
  • Galt followed Tecwyn Twmffat2 years ago