Turn Any Speaker Into a Blu...View Instructable »
Sure. It's 20A at 12V but this is swithing the mains voltage. If your mains is 220V then the relay has to switch about 1A.
Yea I have octoprint plugged in separate phone charger.
Thanks :) if kodi supports standard keyboards then it'll work just fine. And changing the keys is super simple in the sketch.
It does. With more cells, you'll have higher voltage and the energy will be higher too. With the 1300mAh battery you can only draw 58,5A which is not enough. According to my calculations, the coils can draw over 60A. The other 3000mAh battery can supply 120A which is a lot safer and the battery will also last longer.
Thanks :) I agree that making it wireless would be a lot more interesting. Good luck if you decide to build one :)
I got them from hobbyking.com They have a ton of batteries.
E-Paper Picture FrameView Instructable »
PSU Control With OctoprintView Instructable »
I'd suggest checking the update schematic on https://www.instructables.com/id/Coilgun-1/The MOSFET can handle 110A continuously and 390A as pulse current so that isn't going to be a problem. The only real limitation is the battery. The ones I'm using can handle about 90A.