LOVEcraftView Instructable »
Now add a temperature (BME) and a LED-Light to it :)Thank you very much. I'll build this (sooner or later...) Got my vote.
ESP32 Capacitive Touch Input Using "Metallic Hole Plugs" for Buttons
Foot Activated Opposable Thumb Third Hand Clamping Device
Exactly what i'm looking for :)Thx. Will build it soon.
Is it Made of Pla or Abs or petg?
BB8 Droid - Arduino | Remote Controlled | 3D Printed
DIY - Battery Powered Hot Styrofoam Cutter
Child's Toy Light Switch Box - Game Remix
RGB LED Cube With Bluetooth App + AnimationCreator
DIY 3D Printed Dremel CNC
How to Make a Kids Wooden Climber (Pikler Triangle)
Build a Shelter in the Wilderness
Hi, i've added a new data.h. The frames should now be rotated 180°.While this competition is allready over, i would be glad if you vote for my REMIX version:https://www.instructables.com/id/Ring-of-Fire-REMIX/
I'll send you the Code. No big Problem.
LOW COST DIY 500€ CNC MILL
DIY Simple Router Table
Danke für das Gespräch auf der Maker Faire!Viel Glück beim Wettbewerb. Habt meine Stimme.
Yes, a two-sided version is feasible. The driver can handle two displays at the same time. But you have to mirror all pins. This is not as easy as plugging and soldering. But you can do it with very thin wire like varnished copper wire. In my test I only soldered two LED displays on top of each other. It worked.Sooner or later I will build a two-sided candle. Almost everyone asked me whether it would be possible to build a double-sided candle.Translated with www.DeepL.com/Translator
:)This brings me to another idea.
Ring of Fire [REMIX]View Instructable »
Exactly. One Driver andep two displays. The brightness keeps quite bright. I've put one Display onto the other one. Was just for testing. Worked.
Hi,should this work on an ESP8266, too? The teensy is quite expensive, compared to an ESP.
Hi, sorry for beeing late...well, the code should fit. but i'll make another one with just one frame dropped.I'll post it later...
It needs to have the 16mhz chip. example :https://m.de.aliexpress.com/item/32840365436.html?pid=808_0003_0109&spm=a2g0n.search-amp.list.32840365436&aff_trace_key=732a24c246ef4a8583f4a341992f579e-1548393018100-03952-UneMJZVf&aff_platform=msite&m_page_id=8298amp-DGwWrHtjUdN1cx1DXqDieQ1548393052714
Hi,i've made those with a little bit more focused to the original design:https://www.instructables.com/id/Matrix-LED-Light/
Thx for the idea. Made it "quick&dirty" ... but it does it job.
I think you left out the "filet" part between 6+7.
Matrix LED LightView Instructable »
Lumo Jr.View Instructable »