3D Printed Gadgets for Woodworking
I always wanted to build a tool like this, but as I did not felt the need too much it is always delayed. Nevertheless, I wonder whether the changing magnetic field created by the coils (of a slightly bigger brushless motor) isn't enough to spin the magnetic bar? Just to eliminate any moving parts. (It might just not worth to bother with coils like that tho, when a salvaged fan can do the job.)
Very nice project, I love it! I have also made a stop-motion recorder myself for Linux. May be worth to check it on GitHub: https://github.com/prampec/RivetCam
Yes. As I mention in the project page, a simple DC motor might do the job. So, you are right, a hand crank might also be okay, especially for the fine details.Why not? Be inspired!
Egg Decorating CNC Lathe (e...View Instructable »
Custom USB HID DeviceView Instructable »
The lack of the reset pin seams to be normal.But this instruction is wrong. You shouldn't let the example code using pin4 as a non-connected reset pin. Instead you should modify the example not using any parameters while constructing the display. (This will lead to a default value -1 to be set as reset pin, and it is handled by the Adafruite driver.)Also worth to mention that there are SPI-ready versions of this display board, that are also supported by the Adafruite driver. (Buy Adafruite products to support them developing drivers!)
Please note here, that the displayed capacity is valid for just the millisPassed time. Your tool is capable indeed, to distinguish between good and dead batteries, but will not measure the capacity of that battery.What I would recommend, is to make another software, that can measure Watt-hours instead for a whole discharge cycle. As described here:https://youtu.be/R8hTQXqURB4?t=8m37s